OVERcoat pH+

Alkaline Car Shampoo


Surface reset with alkalinity.

With its alkaline power, OVERcoat pH+ can remove stubborn dirt, oil slicks, water stains, insects, etc. Ideal for pre-washing any surface and providing a resetting effect. It can be used on interior surfaces and turns into a great all-purpose cleaner. For mild to stubborn stains, the highly concentrated formula can be diluted as needed.

pH Balanced

Safe to use on any surface. *

Strong Shampoo

Easily removes oil and grease from exterior and interior surfaces. Applicable to all kinds of materials.

Versatile

Can be used with a variety of tools. Buckets, sprays, foam guns and more!

Shampoo & Cleaner

With hybrid technology, it has the foaming and lubricating functions of a shampoo and contains the removing power of a APC.

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"*If you are concerned about the effectiveness of using the undiluted solution on a specific surface, please test on an inconspicuous area."}]}]}

Specifications

Precautions

Do not drink. If ingested, do not induce vomiting. If the liquid gets into your eyes, rinse immediately with water. Seek medical attention if any abnormalities occur. Store out of the reach of children in a cool, dark place.The product may undergo discoloration, but this does not affect its effectiveness. Effects may vary depending on the surface. If unsure about the effect on a specific surface (windshield, aluminum, etc.), please test on an inconspicuous area. When using the undiluted solution, apply by small sections rather than the entire surface and wash it off immediately. Avoid leaving the liquid on the surface for extended periods of time. Please note that when using the undiluted solution, the existing coating layer may peel off. Do not wash your car continuously with undiluted solution. Do not use on deteriorated clear coatings, glass, wheels(cracks, scratches), or peeling paint. Do not use undiluted solution on aluminum, alumite, magnesium, polished, chrome, plated, stainless steel, and metals as it may cause discoloration or deterioration. Do not use in direct sunlight, windy days or on a hot vehicle surface. To prevent stains and water spots, ensure that the water does not dry naturally after washing. The use of protective gloves is recommended. Wash your hands thoroughly after use. The product is biodegradable. OVERCOAT JAPAN is not responsible for any injuries caused by incorrect and improper use of the product. Read this carefully before using this product.

Do not drink. If ingested, do not induce vomiting. If the liquid gets into your eyes, rinse immediately with water. Seek medical attention if any abnormalities occur. Store out of the reach of children in a cool, dark place.The product may undergo discoloration, but this does not affect its effectiveness. Effects may vary depending on the surface. If unsure about the effect on a specific surface (windshield, aluminum, etc.), please test on an inconspicuous area. When using the undiluted solution, apply by small sections rather than the entire surface and wash it off immediately. Avoid leaving the liquid on the surface for extended periods of time. Please note that when using the undiluted solution, the existing coating layer may peel off. Do not wash your car continuously with undiluted solution. Do not use on deteriorated clear coatings, glass, wheels(cracks, scratches), or peeling paint. Do not use undiluted solution on aluminum, alumite, magnesium, polished, chrome, plated, stainless steel, and metals as it may cause discoloration or deterioration. Do not use in direct sunlight, windy days or on a hot vehicle surface. To prevent stains and water spots, ensure that the water does not dry naturally after washing. The use of protective gloves is recommended. Wash your hands thoroughly after use. The product is biodegradable. OVERCOAT JAPAN is not responsible for any injuries caused by incorrect and improper use of the product. Read this carefully before using this product.

How to Use

Contact Wash

Foam Spray

STEP 1 In a high pressure foam spray, dilute 30ml (1oz) of OVERcoat pH+ in 1 liter of water (33oz).

STEP 2 Wet the vehicle beforehand to lubricate the surface and foam spray one section (spray by sections).

STEP 3 Spray a little on the washing tool and wash the vehicle.

STEP 4 Rinse the section and repeat the process until applied to the entire vehicle.

STEP 5 Dry the vehicle with a damp, well-wrung out microfiber towel.

Contact Wash

Bucket

STEP 1 Add 30ml of OVERcoat pH+ to a 10L bucket of water and lather with a hose.

STEP 2 Rinse your vehicle, then dip a sponge or mitt of your choice into the bucket and apply it to the surface.

STEP 3 Rinse your car thoroughly and dry it with a microfiber towel.

For Tough Dirt and Heavy Cleaning

Straight Solution

STEP 1 Be sure to wash a small section of your vehicle when using this method. Rinse the surface, then apply OVERcoat pH+ with an applicator, sponge, or mitt of your choice.

STEP 2 Aim the stubborn stains and rub gently.

STEP 3 Immediately rinse the area thoroughly and dry with a microfiber towel.

FAQ

Frequently Asked Questions