Deep Clean Kit

Sale price¥9,980 Regular price¥14,720
Save 32%

Tax included. Shipping calculated at checkout


In stock

PRE-ORDER NOW

Free Shipping

Ships from June 18

Body Deep Care Set

3pH wash and iron decontamination for thorough body care.

A body care set that combines the three OVERcoat shampoos — pH+, pH-, and Neutral pH — with IRON REMOVER and ULTRAviolet.

It allows you to wash according to each type of dirt, such as oily residue, bug stains, water spots, and mineral contamination, while also helping remove iron contamination from the body and wheels.

As the final step, OVERcoat ULTRAviolet adds gloss and hydrophobic performance to the paint. Recommended for those who want to go beyond a regular wash and give the body a more detailed, deeper level of care.

OVERcoat pH+

Recommended for removing oily film, insect residue, grease, tar, and other dirt from the body. Used as a pre-wash, it helps loosen dirt before hand washing, making it easier to remove.

Dilute in a spray bottle, apply to the entire car, wait about 2 minutes, then rinse thoroughly with a pressure washer or a strong stream of water.

OVERcoat pH+

Recommended for removing oily film, insect residue, grease, tar, and other dirt from the body. Used as a pre-wash, it helps loosen dirt before hand washing, making it easier to remove.

Dilute in a spray bottle, apply to the entire car, wait about 2 minutes, then rinse thoroughly with a pressure washer or a strong stream of water.

Man rinsing a vehicle with OC logo on the background

OVERcoat pH-

Recommended for water spots, mineral contamination, rain stains, road salt, and salt residue from coastal areas. It can be used as a pre-wash and applied either before or after an alkaline shampoo, depending on the condition of the vehicle.

For heavier mineral-based contamination, such as after driving near railways, coastal areas, or snowy roads, dilute the product in a sprayer, apply it over the entire vehicle, and let it dwell for about 2 minutes. Then rinse thoroughly with a pressure washer or a strong stream of water.

If the vehicle has already been pre-washed with an alkaline shampoo, it is also recommended to apply the product with a foam gun, covering the entire vehicle with foam, and then proceed directly to a hand wash using OVERcoat Neutral pH.

OVERcoat pH-

Recommended for water spots, mineral contamination, rain stains, road salt, and salt residue from coastal areas. It can be used as a pre-wash and applied either before or after an alkaline shampoo, depending on the condition of the vehicle.

For heavier mineral-based contamination, such as after driving near railways, coastal areas, or snowy roads, dilute the product in a sprayer, apply it over the entire vehicle, and let it dwell for about 2 minutes. Then rinse thoroughly with a pressure washer or a strong stream of water.

If the vehicle has already been pre-washed with an alkaline shampoo, it is also recommended to apply the product with a foam gun, covering the entire vehicle with foam, and then proceed directly to a hand wash using OVERcoat Neutral pH.

Man rinsing a vehicle with OC logo on the background

OVERcoat Neutral pH

A neutral shampoo used after loosening dirt during the pre-wash. With rich foam and high lubrication, it helps reduce friction during contact wash and lowers the risk of fine scratches.

Dilute in a foam gun, foam spray, or bucket. Apply foam to the entire car, wash from the roof down to the lower sections, and rinse thoroughly at the end.

OVERcoat Neutral pH

A neutral shampoo used after loosening dirt during the pre-wash. With rich foam and high lubrication, it helps reduce friction during contact wash and lowers the risk of fine scratches.

Dilute in a foam gun, foam spray, or bucket. Apply foam to the entire car, wash from the roof down to the lower sections, and rinse thoroughly at the end.

OVERcoat IRON REMOVER

If the body feels rough to the touch, iron particles may be bonded to the paint. IRON REMOVER is an iron decontamination product that helps loosen these particles, making them easier to remove during washing.

For best results, use it after washing, on a clean and dry surface.

Dilute it in a spray bottle and apply it to the entire body. Once the product reacts and turns purple, gently hand wash the car again with OVERcoat Neutral pH, then rinse thoroughly.

To avoid contact with the wheels, we recommend covering them during application if needed.

OVERcoat IRON REMOVER

If the body feels rough to the touch, iron particles may be bonded to the paint. IRON REMOVER is an iron decontamination product that helps loosen these particles, making them easier to remove during washing.

For best results, use it after washing, on a clean and dry surface.

Dilute it in a spray bottle and apply it to the entire body. Once the product reacts and turns purple, gently hand wash the car again with OVERcoat Neutral pH, then rinse thoroughly.

To avoid contact with the wheels, we recommend covering them during application if needed.

OVERcoat ULTRAviolet

A foam ceramic coating that can be used on the wet body after washing. It spreads easily over the entire car and helps prevent streaks or uneven application.

Dilute in a foam gun or foam spray and apply to the entire car while it is still wet. Wait about 2 minutes, then rinse thoroughly. When using it with a bucket, apply it section by section and rinse each area right away before the product dries. Finally, dry the entire car thoroughly so no water droplets remain on the surface.

OVERcoat ULTRAviolet

A foam ceramic coating that can be used on the wet body after washing. It spreads easily over the entire car and helps prevent streaks or uneven application.

Dilute in a foam gun or foam spray and apply to the entire car while it is still wet. Wait about 2 minutes, then rinse thoroughly. When using it with a bucket, apply it section by section and rinse each area right away before the product dries. Finally, dry the entire car thoroughly so no water droplets remain on the surface.


One product, multiple ways to use it.

HYBRID TECHNOLOGY

OVERcoat products are designed to be used in different ways, depending on the vehicle’s condition and the purpose of the cleaning.

This is what we call OVERcoat HYBRID TECHNOLOGY.

To learn more about each product’s features and how to use them, visit the product pages below.