Specs
OVERcoat Final Touch GLASS
Product Specification
Product Name
OVERcoat Final Touch GLASS
Category
Glass Coating Agent
Content Volume
500ml
Total Weight
Approx. 480g
Product Size (Package)
65 × 65 × 250 mm
Ingredients
Dipropylene Glycol, Propylene Carbonate, Silicone
Included Accessory
Push-pull cap
Precautions
Warning (General Precautions)
- Do not inhale or ingest. Harmful to the human body — avoid breathing or swallowing the product.
- Flammable — keep away from fire and heat sources.
- Keep out of reach of children.
- Wear protective gloves before use.
- OVERcoat Japan is not responsible for any injuries or damages resulting from improper use.
First Aid
- Eyes: Rinse immediately with clean water for 15 minutes. If irritation persists, consult a physician.
- Skin: Wash thoroughly with water. If irritation continues, consult a physician.
- Ingestion: Do not induce vomiting. Seek medical attention immediately.
Usage Precautions
- Do not use for purposes other than intended.
- Do not use on the inside of windows.
- Durability may vary depending on conditions. Reapply when the water-repellent effect weakens.
- Do not use on headlights (clear plastic), helmet visors, goggles, or glasses.
- If wiper blades are deteriorated, they may cause chatter — replace them if necessary.
- Do not leave the product on the surface for a long time.
- Avoid use in strong winds, direct sunlight, or when the vehicle surface is hot.
Storage and Disposal
- Do not store inside the vehicle or trunk.
- Keep away from direct sunlight, temperatures above 40°C, or areas at risk of freezing.
- Use within one year after opening.
- Dispose of only after the contents are completely used.
Product Name
OVERcoat Final Touch GLASS
Category
Glass Coating Agent
Content Volume
500ml
Total Weight
Approx. 480g
Product Size (Package)
65 × 65 × 250 mm
Ingredients
Dipropylene Glycol, Propylene Carbonate, Silicone
Included Accessory
Push-pull cap
Warning (General Precautions)
- Do not inhale or ingest. Harmful to the human body — avoid breathing or swallowing the product.
- Flammable — keep away from fire and heat sources.
- Keep out of reach of children.
- Wear protective gloves before use.
- OVERcoat Japan is not responsible for any injuries or damages resulting from improper use.
First Aid
- Eyes: Rinse immediately with clean water for 15 minutes. If irritation persists, consult a physician.
- Skin: Wash thoroughly with water. If irritation continues, consult a physician.
- Ingestion: Do not induce vomiting. Seek medical attention immediately.
Usage Precautions
- Do not use for purposes other than intended.
- Do not use on the inside of windows.
- Durability may vary depending on conditions. Reapply when the water-repellent effect weakens.
- Do not use on headlights (clear plastic), helmet visors, goggles, or glasses.
- If wiper blades are deteriorated, they may cause chatter — replace them if necessary.
- Do not leave the product on the surface for a long time.
- Avoid use in strong winds, direct sunlight, or when the vehicle surface is hot.
Storage and Disposal
- Do not store inside the vehicle or trunk.
- Keep away from direct sunlight, temperatures above 40°C, or areas at risk of freezing.
- Use within one year after opening.
- Dispose of only after the contents are completely used.
FAQ
Frequently Asked Questions
What is the benefit of a water-repellent glass?
Wind pressure while driving makes it easier for water droplets to flow. It also prevents water droplets from remaining on the glass.
Is surface preparation necessary before application?
The effect will be better if you prepare the surface.
How often does it need to be applied?
It depends on factors such as the environment and how often you use your car. It is safe to reapply when the water repellency becomes weaker.
What kind of surfaces can it be used on?
For glass use only. It can be applied on side mirrors, front/rear windshields and side windows.
How long does the water-repellent effect last?
It typically lasts for about 2 months.
When should I use the push-pull cap?
Soon after opening the product, throw the original cap and replace it for the push-pull cap.
Where should it be stored?
In a cool and dark place, out of the reach of children.














