Specs
OVERcoat Final Touch TRIM
Product Specifications
Product Name
OVERcoat Final Touch TRIM
Category
Resin Coating Agent (For Exterior Plastic Parts)
Content Volume
100ml
Total Weight
Approx. 230g
Product Size (Package)
65 × 65 × 250 mm
Ingredients
Polyacrylic Resin, Propanediol, Resin, Fragrance
Included Accessory
Applicator
Precautions
Warning (General Precautions)
- Do not ingest. Harmful to health — avoid inhalation and ingestion.
- Flammable — keep away from fire and heat sources.
- Keep out of reach of children.
- Wear protective gloves before use.
- OVERcoat Japan is not responsible for any injuries or damages caused by improper use.
First Aid
- Eyes: Rinse with clean water for 15 minutes. If irritation persists, consult a physician.
- Skin: Wash thoroughly with water. If irritation continues, seek medical attention.
- Ingestion: Do not induce vomiting. Seek medical attention immediately.
Usage Precautions
- Effectiveness may vary depending on the surface type and condition.
- Do not use under direct sunlight or when the vehicle surface is hot.
- Use only for the intended purpose — do not apply on body paint or glass surfaces.
- If the product comes into contact with paint or glass, wipe off immediately with a dry cloth.
- A slight change in product color may occur over time, but this does not affect performance.
Storage and Disposal
- Do not store inside the vehicle or trunk.
- Keep away from direct sunlight, high temperatures (above 40°C), or freezing conditions.
- Use within one year after opening.
- Dispose of the container only after fully using the contents.
Product Name
OVERcoat Final Touch TRIM
Category
Resin Coating Agent (For Exterior Plastic Parts)
Content Volume
100ml
Total Weight
Approx. 230g
Product Size (Package)
65 × 65 × 250 mm
Ingredients
Polyacrylic Resin, Propanediol, Resin, Fragrance
Included Accessory
Applicator
Warning (General Precautions)
- Do not ingest. Harmful to health — avoid inhalation and ingestion.
- Flammable — keep away from fire and heat sources.
- Keep out of reach of children.
- Wear protective gloves before use.
- OVERcoat Japan is not responsible for any injuries or damages caused by improper use.
First Aid
- Eyes: Rinse with clean water for 15 minutes. If irritation persists, consult a physician.
- Skin: Wash thoroughly with water. If irritation continues, seek medical attention.
- Ingestion: Do not induce vomiting. Seek medical attention immediately.
Usage Precautions
- Effectiveness may vary depending on the surface type and condition.
- Do not use under direct sunlight or when the vehicle surface is hot.
- Use only for the intended purpose — do not apply on body paint or glass surfaces.
- If the product comes into contact with paint or glass, wipe off immediately with a dry cloth.
- A slight change in product color may occur over time, but this does not affect performance.
Storage and Disposal
- Do not store inside the vehicle or trunk.
- Keep away from direct sunlight, high temperatures (above 40°C), or freezing conditions.
- Use within one year after opening.
- Dispose of the container only after fully using the contents.
FAQ
Frequently Asked Questions
How long does it take to cure?
Curing time is approximately 2 to 3 hours.
Is surface preparation necessary before application?
The effect will be better if you prepare the surface.
How often does it need to be applied?
It depends on factors such as the environment and how often you use your car. It is safe to reapply when the plastic trim becomes dull.
What kind of applicator can it be applied with?
It can be applied with microfiber, sponge applicators or detailing brushes.
What kind of surfaces can it be used on?
Windshield wiper resin area, front grille, fender arches, door frames, bumpers, side mirror resin parts, etc.
How long does it last?
It typically lasts for about 2 months.
Where should it be stored?
In a cool and dark place, out of the reach of children.
Does discoloration occur?
The product may undergo discoloration, but this does not affect its effectiveness.














