OVERcoat NANOpolish
User Guide – Use like a professional
Learn the real techniques used by professionals.
Specs
OVERcoat NANOpolish
Product Specifications
Product Name
OVERcoat NANOpolish
Category
Paintwork-only compound
Content Volume
500ml
Product Size (Package)
65 × 65 × 250 mm
Ingredients
Abrasives (aluminum oxide, silicon dioxide), lubricants (mineral oil, polydimethylsiloxane), surfactants, thickener, preservative, water
Included Accessory
Push-pull cap
注意事項
Warning (General Precautions)
- Do not ingest.
- Keep out of reach of children.
- Wear protective gloves before use.
- OVERcoat Japan is not responsible for any injuries or damages resulting from improper use.
First Aid
- Eyes: Rinse with clean water for 15 minutes. If irritation persists, consult a physician.
- Skin: Wash thoroughly with water. If irritation continues, seek medical advice.
- Ingestion: Do not induce vomiting. Seek medical attention immediately.
Usage Precautions
- Do not use for purposes other than intended.
- For automotive painted surfaces (body) only. Not for glass.
- Avoid excessive heat during polishing. If it exceeds 40°C, haze may occur. Stop and let it cool if it gets hot.
- Do not use on matte paint or wrapping film.
- If it gets on unpainted plastic, rubber, chrome, emblems, etc., wipe off immediately.
- Uneven finishing (holograms/haze) may occur. Adjust the pad and always test on an inconspicuous area first.
- Do not over-polish the same area (the clear coat may become thinner).
- Do not leave the product on the surface for a long time.
- Use in a well-ventilated area. Do not eat, drink, or smoke while working. Wash hands thoroughly after use.
- Do not use in strong wind, under direct sunlight, or when the body is hot.
Storage and Disposal
- Do not store inside the vehicle or trunk.
- Keep away from direct sunlight, temperatures above 40°C, or areas at risk of freezing.
- Use within one year after opening.
- Dispose of the container only after fully using the contents.
Product Name
OVERcoat NANOpolish
Category
Paintwork-only compound
Content Volume
500ml
Product Size (Package)
65 × 65 × 250 mm
Ingredients
Abrasives (aluminum oxide, silicon dioxide), lubricants (mineral oil, polydimethylsiloxane), surfactants, thickener, preservative, water
Included Accessory
Push-pull cap
Warning (General Precautions)
- Do not ingest.
- Keep out of reach of children.
- Wear protective gloves before use.
- OVERcoat Japan is not responsible for any injuries or damages resulting from improper use.
First Aid
- Eyes: Rinse with clean water for 15 minutes. If irritation persists, consult a physician.
- Skin: Wash thoroughly with water. If irritation continues, seek medical advice.
- Ingestion: Do not induce vomiting. Seek medical attention immediately.
Usage Precautions
- Do not use for purposes other than intended.
- For automotive painted surfaces (body) only. Not for glass.
- Avoid excessive heat during polishing. If it exceeds 40°C, haze may occur. Stop and let it cool if it gets hot.
- Do not use on matte paint or wrapping film.
- If it gets on unpainted plastic, rubber, chrome, emblems, etc., wipe off immediately.
- Uneven finishing (holograms/haze) may occur. Adjust the pad and always test on an inconspicuous area first.
- Do not over-polish the same area (the clear coat may become thinner).
- Do not leave the product on the surface for a long time.
- Use in a well-ventilated area. Do not eat, drink, or smoke while working. Wash hands thoroughly after use.
- Do not use in strong wind, under direct sunlight, or when the body is hot.
Storage and Disposal
- Do not store inside the vehicle or trunk.
- Keep away from direct sunlight, temperatures above 40°C, or areas at risk of freezing.
- Use within one year after opening.
- Dispose of the container only after fully using the contents.
What's in the box?
FAQ
Frequently Asked Questions
What is NANOpolish?
NANOpolish is a 3-in-1 polishing compound designed to deliver cut (correction), refinement, and high gloss with one product. The finish is mainly tuned by pad choice and technique.
What does “3-in-1” mean in practice?
It means you can go from correction to gloss without switching compounds—adjust the result with pads and working method.
Can I use it with any polisher? (DA / rotary)
Yes. NANOpolish is compatible with any machine, regardless of rotation type.
Can it be used by hand (no machine)?
Yes. It can be used manually on small areas—for example, to remove light scratches around door handles.
Does it produce a lot of dust?
No. Under normal use, it’s a low-dust compound.
What surfaces can I use it on?
For automotive painted surfaces (bodywork) only. Not for glass. Also do not use on matte paint or wrap/PPF films.
How do I avoid haze/“DA haze” and overheating?
Avoid excess heat. Above 40°C, haze may occur. If it gets hot, stop and let it cool. If haze/“aurora” appears, adjust the pad and always test first on an inconspicuous area.
If it gets on unpainted plastics, rubber, chrome, or emblems—what should I do?
If it contacts unpainted plastics, rubber, chrome, or emblems, wipe it off immediately.
What should I avoid?
- Don’t over-polish the same spot (it may thin the clear coat).
- Don’t leave the product sitting on the surface for long periods.
- Don’t use in strong wind, direct sunlight, or on a hot panel.
- Work in a well-ventilated area; don’t eat/drink/smoke while using; wash hands after use.
