Daily Care Kit
Tax included. Shipping calculated at checkout
Orders placed today ship the next business day.
Daily care in one complete set
Basic Exterior and Interior Care.
A daily care kit that brings together everything you need to remove light dirt from the body, care for the interior, add protection to the paint, and finish the tires.
For regular washes, it helps gently remove dirt while adding hydrophobic performance to the body. It also lets you refresh the interior areas that need attention and finish the process by leaving the tires clean and well cared for.
OVERcoat Neutral pH
A neutral shampoo used after loosening dirt during the pre-wash. With rich foam and high lubrication, it helps reduce friction during contact wash and lowers the risk of fine scratches.
Dilute in a foam gun, foam spray, or bucket. Apply foam to the entire car, wash from the roof down to the lower sections, and rinse thoroughly at the end.
OVERcoat Neutral pH
A neutral shampoo used after loosening dirt during the pre-wash. With rich foam and high lubrication, it helps reduce friction during contact wash and lowers the risk of fine scratches.
Dilute in a foam gun, foam spray, or bucket. Apply foam to the entire car, wash from the roof down to the lower sections, and rinse thoroughly at the end.
OVERcoat Surface PREP
A degreasing cleaner for light interior cleaning and for removing product residue and oils after using pH+. It helps remove leftover surfactants and leaves the surface with a cleaner finish.
Spray it onto a damp towel and gently wipe the area. Flip the towel to a clean side, wipe again, then finish with a dry towel. Do not use on genuine leather seats. For electrical areas such as navigation screens, buttons, and switches, do not spray directly onto the surface. Always apply it to the towel first.
OVERcoat Surface PREP
A degreasing cleaner for light interior cleaning and for removing product residue and oils after using pH+. It helps remove leftover surfactants and leaves the surface with a cleaner finish.
Spray it onto a damp towel and gently wipe the area. Flip the towel to a clean side, wipe again, then finish with a dry towel. Do not use on genuine leather seats. For electrical areas such as navigation screens, buttons, and switches, do not spray directly onto the surface. Always apply it to the towel first.
OVERcoat ULTRAviolet
A foam ceramic coating that can be used on the wet body after washing. It spreads easily over the entire car and helps prevent streaks or uneven application.
Dilute in a foam gun or foam spray and apply to the entire car while it is still wet. Wait about 2 minutes, then rinse thoroughly. When using it with a bucket, apply it section by section and rinse each area right away before the product dries. Finally, dry the entire car thoroughly so no water droplets remain on the surface.
OVERcoat ULTRAviolet
A foam ceramic coating that can be used on the wet body after washing. It spreads easily over the entire car and helps prevent streaks or uneven application.
Dilute in a foam gun or foam spray and apply to the entire car while it is still wet. Wait about 2 minutes, then rinse thoroughly. When using it with a bucket, apply it section by section and rinse each area right away before the product dries. Finally, dry the entire car thoroughly so no water droplets remain on the surface.
OVERcoat Final Touch TIRE
Water-based and carnauba infused tire dressing.
After washing, use only after thoroughly drying the car and tires. Apply an appropriate amount to an applicator and spread it evenly over the tire sidewall. After application, leave the car parked for about 2 hours to allow the product to bond properly. For a matte finish, wipe off the excess with a microfiber towel. For a glossier finish, let it dry naturally. If the product gets on the wheel, wipe it off with a dry cloth.
OVERcoat Final Touch TIRE
Water-based and carnauba infused tire dressing.
After washing, use only after thoroughly drying the car and tires. Apply an appropriate amount to an applicator and spread it evenly over the tire sidewall. After application, leave the car parked for about 2 hours to allow the product to bond properly. For a matte finish, wipe off the excess with a microfiber towel. For a glossier finish, let it dry naturally. If the product gets on the wheel, wipe it off with a dry cloth.
One product, multiple ways to use it.
HYBRID TECHNOLOGY
OVERcoat products are designed to be used in different ways, depending on the vehicle’s condition and the purpose of the cleaning.
This is what we call OVERcoat HYBRID TECHNOLOGY.
To learn more about each product’s features and how to use them, visit the product pages below.
他の製品をチェック
