3pH Kit
Tax included. Shipping calculated at checkout
PRE-ORDER NOW
Ships from June 18
3 pH levels for a more precise wash
3pH care tailored to each type of dirt.
A 3pH set that includes an alkaline shampoo to target oily residue and bug stains, an acidic shampoo designed for water spots and mineral contamination, and a neutral shampoo for a safe contact wash. Recommended for those who want to make their regular wash routine more efficient, more refined, and more thorough.
OVERcoat pH+
Recommended for removing oily film, insect residue, grease, tar, and other dirt from the body. Used as a pre-wash, it helps loosen dirt before hand washing, making it easier to remove.
Dilute in a spray bottle, apply to the entire car, wait about 2 minutes, then rinse thoroughly with a pressure washer or a strong stream of water.
OVERcoat pH+
Recommended for removing oily film, insect residue, grease, tar, and other dirt from the body. Used as a pre-wash, it helps loosen dirt before hand washing, making it easier to remove.
Dilute in a spray bottle, apply to the entire car, wait about 2 minutes, then rinse thoroughly with a pressure washer or a strong stream of water.
OVERcoat pH-
Recommended for water spots, mineral contamination, rain stains, road salt, and salt residue from coastal areas. It can be used as a pre-wash and applied either before or after an alkaline shampoo, depending on the condition of the vehicle.
For heavier mineral-based contamination, such as after driving near railways, coastal areas, or snowy roads, dilute the product in a sprayer, apply it over the entire vehicle, and let it dwell for about 2 minutes. Then rinse thoroughly with a pressure washer or a strong stream of water.
If the vehicle has already been pre-washed with an alkaline shampoo, it is also recommended to apply the product with a foam gun, covering the entire vehicle with foam, and then proceed directly to a hand wash using OVERcoat Neutral pH.
OVERcoat pH-
Recommended for water spots, mineral contamination, rain stains, road salt, and salt residue from coastal areas. It can be used as a pre-wash and applied either before or after an alkaline shampoo, depending on the condition of the vehicle.
For heavier mineral-based contamination, such as after driving near railways, coastal areas, or snowy roads, dilute the product in a sprayer, apply it over the entire vehicle, and let it dwell for about 2 minutes. Then rinse thoroughly with a pressure washer or a strong stream of water.
If the vehicle has already been pre-washed with an alkaline shampoo, it is also recommended to apply the product with a foam gun, covering the entire vehicle with foam, and then proceed directly to a hand wash using OVERcoat Neutral pH.
OVERcoat Neutral pH
A neutral shampoo used after loosening dirt during the pre-wash. With rich foam and high lubrication, it helps reduce friction during contact wash and lowers the risk of fine scratches.
Dilute in a foam gun, foam spray, or bucket. Apply foam to the entire car, wash from the roof down to the lower sections, and rinse thoroughly at the end.
OVERcoat Neutral pH
A neutral shampoo used after loosening dirt during the pre-wash. With rich foam and high lubrication, it helps reduce friction during contact wash and lowers the risk of fine scratches.
Dilute in a foam gun, foam spray, or bucket. Apply foam to the entire car, wash from the roof down to the lower sections, and rinse thoroughly at the end.
One product, multiple ways to use it.
HYBRID TECHNOLOGY
OVERcoat products are designed to be used in different ways, depending on the vehicle’s condition and the purpose of the cleaning.
This is what we call OVERcoat HYBRID TECHNOLOGY.
To learn more about each product’s features and how to use them, visit the product pages below.
See other products
